Watertight gates

Contact information

To learn more about this product and how it can meet your needs, please don’t hesitate to contact us today!

Downloads

Protect buildings and structures from floods and torrential rain.
For various types of passageways and openings.
Easy manipulation.

Product description

The gate can be divided into two basic parts – firmly anchored elements and a sliding gate leaf. Protection is provided by a special sealing profile which is a part of the sliding gate leaf. On one side of the opening is an end column and on the other side is an guide column. At the terrain level is a threshold profile with cover.

Below the cover is a rail which the gate leaf moves along. If the gate needs to be sealed against water, the covers of the threshold profile and of the columns are opened, the gate leaf slides into the created openings and is tightened using pressure levers.

Watertightness of the gate is ensured by a sealing rubber profile attached along the periphery of the sliding leaf. In normal use, the gate remains in the open position and is secured by a pin with a lock.

Seal activation

The seal is activated using a system of pressure levers. Turning the levers pushes the gate leaf down onto the contact surfaces of the seal.

Gate installation

The gate was designed for various types of passageways and openings, but in order to operate, it always requires the installation of the bottom profile into a concrete foundation. This profile carries the gate‘s slide rail. The rail is protected by a cover which is designed to allow passage of vehicles (max. load capacity of 12 t).

Product details

BOARD

is made of galvanized sheet or aluminium alloy (EN AW 5754) resistant to seawater. For easy and fast joining, the plates are fitted with FLOM joining locks.

FOILS

protects against undermining of the barrier, weighted down with chains and soil at the bottom and attached to the structure with locking clips at the top.